# \#fcm **URL:** https://forums.ipg-automotive.com/tag/fcm/3.md [Latest](https://forums.ipg-automotive.com/latest.md) · [Categories](https://forums.ipg-automotive.com/categories.md) · [Tags](https://forums.ipg-automotive.com/tags.md) --- ## [Direct Suspension](https://forums.ipg-automotive.com/t/direct-suspension/2041)
**Author:** [@fcm.user\_26](https://forums.ipg-automotive.com/u/fcm.user_26)\ **Replies:** 1\ **Last updated:** [8 July 2026 15:54 UTC](https://forums.ipg-automotive.com/t/direct-suspension/2041 "2026-07-08T15:54:50Z")
Hello, I try to create a Direct Suspension in IPGKinematics, but I face some problems. First of all, there is no rocker and no stabilzer. I select None for Stabilizer Bar Fixing and Pull-/Pushrod Fixing (because there i… --- ## [Suspension knc error with skc file](https://forums.ipg-automotive.com/t/suspension-knc-error-with-skc-file/695)
**Author:** [@Sam.123](https://forums.ipg-automotive.com/u/Sam.123)\ **Replies:** 9\ **Last updated:** [12 February 2026 13:18 UTC](https://forums.ipg-automotive.com/t/suspension-knc-error-with-skc-file/695 "2026-02-12T13:18:11Z")
Hi, I was trying to import my own car parameters but when I import the skc file from IPG kinematics, I keep on getting the Suspension knc error. As per my observation I think it would be related to the co- ordinate syst… --- ## [Skc File Error for Double Wishbone Rear Suspension](https://forums.ipg-automotive.com/t/skc-file-error-for-double-wishbone-rear-suspension/2022)
**Author:** [@fcm.user\_26](https://forums.ipg-automotive.com/u/fcm.user_26)\ **Replies:** 1\ **Last updated:** [6 February 2026 21:03 UTC](https://forums.ipg-automotive.com/t/skc-file-error-for-double-wishbone-rear-suspension/2022 "2026-02-06T21:03:12Z")
Hello, I tried to run the rear suspension that i created in IPGKinematics, but I have the following errors that I cannot understand and fix. Here my skc file in case it is needed. Angelos\_querlenker\_kin1d\_rear.skc (65… --- ## [How to make a model of a Direct Front Suspension](https://forums.ipg-automotive.com/t/how-to-make-a-model-of-a-direct-front-suspension/2023)
**Author:** [@fcm.user\_26](https://forums.ipg-automotive.com/u/fcm.user_26)\ **Replies:** 0\ **Last updated:** [2 February 2026 23:55 UTC](https://forums.ipg-automotive.com/t/how-to-make-a-model-of-a-direct-front-suspension/2023 "2026-02-02T23:55:21Z")
Hello, I tried to create a Direct Front Suspension in IPGKinematics. To give some context, this suspension model has no rockers and no torsion bar(Anti-roll bar). So a lot of the Coordinates in Geometry do not exist (ev… --- ## [How do I put my suspension from IPGKinematics in my vehicle model?](https://forums.ipg-automotive.com/t/how-do-i-put-my-suspension-from-ipgkinematics-in-my-vehicle-model/2018)
**Author:** [@fcm.user\_26](https://forums.ipg-automotive.com/u/fcm.user_26)\ **Replies:** 0\ **Last updated:** [30 January 2026 18:33 UTC](https://forums.ipg-automotive.com/t/how-do-i-put-my-suspension-from-ipgkinematics-in-my-vehicle-model/2018 "2026-01-30T18:33:17Z")
Hello, I have created an .kin file in IPGKinematics for my DoubleWishbone Rear Suspension, but I cannot understand how can I run it in my vehicle model (Parameters\>Suspensions\>Kinematics). Should I make an skc file? How… --- ## [Error with FCM\_Folder](https://forums.ipg-automotive.com/t/error-with-fcm-folder/2003)
**Author:** [@fcm.user\_26](https://forums.ipg-automotive.com/u/fcm.user_26)\ **Replies:** 6\ **Last updated:** [27 January 2026 12:12 UTC](https://forums.ipg-automotive.com/t/error-with-fcm-folder/2003 "2026-01-27T12:12:14Z")
Hello, I have downloaded the formula-carmaker-fs\_2025 file from the IPG Site, but i cannot run the TestRuns from the FS\_race files. It shows an error. Where should I place the folder FCM\_Projects to be able to run every… --- ## [ICE vehicles not moving in LTS](https://forums.ipg-automotive.com/t/ice-vehicles-not-moving-in-lts/2006)
**Author:** [@fcm.user\_261](https://forums.ipg-automotive.com/u/fcm.user_261)\ **Replies:** 1\ **Last updated:** [22 January 2026 14:44 UTC](https://forums.ipg-automotive.com/t/ice-vehicles-not-moving-in-lts/2006 "2026-01-22T14:44:18Z")
In the LTS project, FS Baseline ICE Vehicles do not move. it gives an error, stating “Testrun missing in ‘name of computer’” appears at the point you press start on the simulation in the main GUI. If you then click ok th… --- ## [How can I access basic Vehicle parameters like the coefficient of drag in the generic Simulink model?](https://forums.ipg-automotive.com/t/how-can-i-access-basic-vehicle-parameters-like-the-coefficient-of-drag-in-the-generic-simulink-model/1991)
**Author:** [@fcm.user\_26](https://forums.ipg-automotive.com/u/fcm.user_26)\ **Replies:** 0\ **Last updated:** [5 December 2025 14:36 UTC](https://forums.ipg-automotive.com/t/how-can-i-access-basic-vehicle-parameters-like-the-coefficient-of-drag-in-the-generic-simulink-model/1991 "2025-12-05T14:36:18Z")
Hello everybody, I want to integrate a vehicle control (TC and TV) for an AWD Formula Student car. That’s why I want to get access all sorts of parameters of the car from CarMaker to the Simulink Model in the generic fi… --- ## [Can you run 2 LiDAR sensors on one LidarRSI cluster](https://forums.ipg-automotive.com/t/can-you-run-2-lidar-sensors-on-one-lidarrsi-cluster/1660)
**Author:** [@IJordano478](https://forums.ipg-automotive.com/u/IJordano478)\ **Replies:** 0\ **Last updated:** [21 February 2025 11:54 UTC](https://forums.ipg-automotive.com/t/can-you-run-2-lidar-sensors-on-one-lidarrsi-cluster/1660 "2025-02-21T11:54:15Z")
Is it possible to run 2 Lidar sensors on the same LidarRSI sensor cluster, similar to one of the user examples given in which you would have a front and back Lidar, but in our application we are comparing detections for … --- ## [How can I simulate pushrod suspension with heave springs, roll springs, and a bell crank in IPGKinematics?](https://forums.ipg-automotive.com/t/how-can-i-simulate-pushrod-suspension-with-heave-springs-roll-springs-and-a-bell-crank-in-ipgkinematics/927)
**Author:** [@HansR](https://forums.ipg-automotive.com/u/HansR)\ **Replies:** 0\ **Last updated:** [26 April 2024 13:44 UTC](https://forums.ipg-automotive.com/t/how-can-i-simulate-pushrod-suspension-with-heave-springs-roll-springs-and-a-bell-crank-in-ipgkinematics/927 "2024-04-26T13:44:14Z")
Hello everyone. I am trying to build a pushrod suspension model in IPGKinematics, which consists of a heave spring, a roll spring, and a bell crank which the heave spring, the roll spring, and the pushrod are connected … --- ## [One or more GPUSensors not ready in time](https://forums.ipg-automotive.com/t/one-or-more-gpusensors-not-ready-in-time/423)
**Author:** [@send-help](https://forums.ipg-automotive.com/u/send-help)\ **Replies:** 15\ **Last updated:** [1 November 2023 19:09 UTC](https://forums.ipg-automotive.com/t/one-or-more-gpusensors-not-ready-in-time/423 "2023-11-01T19:09:03Z")
os: ubuntu 22 ros2: humble carmaker version: 11.0.1 nvidia driver: Geforce RTX 3060 Hey, I’m struggling to run the Lidar sensor with the FS-autonomous project. I have a Nvidia driver but it keeps timing out when tryi… --- ## [Building a Carmaker and ROS environment in windows](https://forums.ipg-automotive.com/t/building-a-carmaker-and-ros-environment-in-windows/572)
**Author:** [@Rajkumar\_2](https://forums.ipg-automotive.com/u/Rajkumar_2)\ **Replies:** 0\ **Last updated:** [30 June 2023 12:33 UTC](https://forums.ipg-automotive.com/t/building-a-carmaker-and-ros-environment-in-windows/572 "2023-06-30T12:33:12Z")
Hello, I was trying to check if we could use the shared FS autonomous project in a windows system which has a working ROS2 installed in it. In order to run the bash file the developer option in the windows file was enabl… --- ## [Drop down for project code in VPM](https://forums.ipg-automotive.com/t/drop-down-for-project-code-in-vpm/537)
**Author:** [@CR19](https://forums.ipg-automotive.com/u/CR19)\ **Replies:** 3\ **Last updated:** [9 June 2023 14:42 UTC](https://forums.ipg-automotive.com/t/drop-down-for-project-code-in-vpm/537 "2023-06-09T14:42:34Z")
The drop down for project code in the virtual prototype management system is not working, see attached screenshot, meaning I am unable to further progress any virtual prototypes. Given this is vital to the competition… --- ## [Unable to run build.sh](https://forums.ipg-automotive.com/t/unable-to-run-build-sh/534)
**Author:** [@Rajkumar\_2](https://forums.ipg-automotive.com/u/Rajkumar_2)\ **Replies:** 2\ **Last updated:** [7 June 2023 14:27 UTC](https://forums.ipg-automotive.com/t/unable-to-run-build-sh/534 "2023-06-07T14:27:14Z")
Hi, I am facing issue to run build.sh. Actually I was trying follow the steps given in CMRosIF User’s Guide for FS Autonomous and getting the following error. Can you please help me with the same. I’m a new user to linux… --- ## [Unable to run build.sh for CM FS-autonomous](https://forums.ipg-automotive.com/t/unable-to-run-build-sh-for-cm-fs-autonomous/422)
**Author:** [@send-help](https://forums.ipg-automotive.com/u/send-help)\ **Replies:** 1\ **Last updated:** [28 February 2023 17:42 UTC](https://forums.ipg-automotive.com/t/unable-to-run-build-sh-for-cm-fs-autonomous/422 "2023-02-28T17:42:45Z")
os: ubuntu 22 ros2: humble carmaker version: 11.0.1 Hey guys, I’m having trouble running build.sh to setup ros2 for carmaker. I’m following the instructions in the FSAI\_UsersGuide file but it keeps giving me this erro… --- ## [Transfer license to a new pc](https://forums.ipg-automotive.com/t/transfer-license-to-a-new-pc/299)
**Author:** [@denise.klemm](https://forums.ipg-automotive.com/u/denise.klemm)\ **Replies:** 1\ **Last updated:** [22 August 2022 14:28 UTC](https://forums.ipg-automotive.com/t/transfer-license-to-a-new-pc/299 "2022-08-22T14:28:19Z")
From a stolen laptop to a team member leaving; sometimes it happens that a license will have to be transferred to a different pc. Read here on how to proceed if your team needs a license transfer. --- ## [Problem with GPU-Sensors](https://forums.ipg-automotive.com/t/problem-with-gpu-sensors/248)
**Author:** [@tim](https://forums.ipg-automotive.com/u/tim)\ **Replies:** 1\ **Last updated:** [16 May 2022 13:45 UTC](https://forums.ipg-automotive.com/t/problem-with-gpu-sensors/248 "2022-05-16T13:45:19Z")
Hey Guys, if I start the FS-autonomous example I am encountering the following problem, if the LIDAR and the Cameras are not deleted: I am using an nVidia GTX 950M with the nVidia 470 Driver on Kubuntu. Looking for…