# Smooth Transition Issue Between Speed Profile and IPGDriver in Multi-Step Maneuver

**URL:** <https://forums.ipg-automotive.com/t/smooth-transition-issue-between-speed-profile-and-ipgdriver-in-multi-step-maneuver/1713>\
**Category:** Uncategorized\
**Tags:** carmaker\
**Created:** [12 March 2025 07:53 UTC](https://forums.ipg-automotive.com/t/smooth-transition-issue-between-speed-profile-and-ipgdriver-in-multi-step-maneuver/1713 "2025-03-12T07:53:46Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Yassine](https://forums.ipg-automotive.com/letter_avatar_proxy/v4/letter/y/c89c15/32.png) [@Yassine](https://forums.ipg-automotive.com/u/Yassine)\
**Post date:** [12 March 2025 07:53 UTC](https://forums.ipg-automotive.com/t/smooth-transition-issue-between-speed-profile-and-ipgdriver-in-multi-step-maneuver/1713/1 "2025-03-12T07:53:46Z")

</div>

Hello everyone,

I am running a simulation in CarMaker with the following three-step maneuver:

1. **ACC Active** – Motion controlled by IPGDriver
2. **ACC Inactive** – Input from file, motion follows a speed profile
3. **ACC Active Again** – Motion returns to IPGDriver

The issue I am facing is that when switching from step 2 (speed profile) to step 3 (IPGDriver), I experience significant acceleration and deceleration, leading to an abrupt transition.

Has anyone encountered a similar issue? Are there any best practices or settings to ensure a smooth transition when switching back to IPGDriver control?

 ![image](https://forums.ipg-automotive.com/uploads/default/original/1X/4da15440c1ee723eb026e08d23afd5420d2cb6d3.png)  
 ![image](https://forums.ipg-automotive.com/uploads/default/original/1X/bfbe3e84dcca22e55c590b56403bdf3e5cb28f2a.png)

---

<div class="post-metadata">

**Author:** ![jose.nevado](https://forums.ipg-automotive.com/letter_avatar_proxy/v4/letter/j/8797f3/32.png) [@jose.nevado](https://forums.ipg-automotive.com/u/jose.nevado)\
**Post date:** [14 March 2025 14:04 UTC](https://forums.ipg-automotive.com/t/smooth-transition-issue-between-speed-profile-and-ipgdriver-in-multi-step-maneuver/1713/2 "2025-03-14T14:04:45Z")

</div>

Hi Yassine,

Just to clarify, if you have the ACC active in Minimaneuvre (0 & 2), the longitudinal dynamics are controlled by the ACC and Acc Controller. IPG driver is only controlling the lateral dynamics (If set to do so).

Between MiniManeuvrre 1 & 2 you might be creating a discontiniuty. Are you also setting a DesireSpd when you active the ACC again? What is the IFF speed set at that point?
